|
|
|
GlobalTuners - Share your receiver
|
Do you have a spare receiver which you want to share with others? Then you have come to the right place.
These are recommendations. We can make exceptions. When in doubt: just e-mail and we will see if we can arrange something.
1. Server hardware
Nearly anything will do. An 1GHz processor (or higher), 256MB (or more) of RAM and 10GB of harddisk space are recommended, but it is possible to use older hardware as well.
Depending on the receiver, you may need some additional hardware to connect the receiver to the computer. Most receivers require a 9-pin RS232/COM/serial port. You will also need a soundcard to feed the audio to the computer.
2. Internet connection
You need at least 32kbytes/sec upstream bandwidth. You may not fill up your available bandwidth with other applications (torrent or other file sharing applications). You must be able to forward a TCP port to the server computer.
3. Receiver
We have drivers available for many radios, including:
- Icom PCR-100, PCR-1000, PCR-1500
- Nearly all Icom transceivers with a RS232 serial interface
- AOR AR-7030, AR-8020
- JRC NRD525
- WDM devices (TV/FM computer cards)
- Yaesu FT-817, VR5000
If your radio is not listed here, just contact us and we will see what we can do.
4. Server software
The server software can run on both, Windows and Linux systems. For Windows systems, Windows 2000 or higher is required. For Linux systems, we recommend Debian Linux, which can be very small and still easy to setup. It is recommended to use a dedicated computer for the GlobalTuners server, but it is possible to run the software on a workstation as well. Our team can support you in installing the operating system and server software.
5. GlobalTuners server
You just need to connect the receiver to your computer, usually you have to connect the receiver to your computer's serial port and connect your receiver's audio output to your computer's audio line in. If you have an Icom PCR-1500 (or similar) receiver with USB connection, you may not need a separate audio connection. When your receiver is connected we can send you the server software and you can try to configure it yourself, or we can remotely install the software using SSH (for linux), VNC (linux/windows), Microsoft RDP (windows) or MSN Remote Assistance (windows). The server software takes care of controlling the receiver, communicating with the users and serving an unlimited number of audio streams.
6. Sounds interesting?
It's a lot of fun to share your radio. Imagine how many people will listen to your radio and have fun with it. Send us an e-mail (node@globaltuners.com) and we will help you to get your radio online.
|
|
Login
|
|
|
|
Active Users
|
|
|
Google ads
|
|
|
|