RECEIVERS
INFORMATION
LINKS
Receiver: Crema 2 - 0-2 GHz All Mode in JN45UI
Please log in to use this receiver:Information
- Operator: IK2CHZ
- Location: Crema, [CR], Italy
- Receiver: Icom IC-R8500
- Antenna: 0-30 MHz: Diamond WD330 T2FD 25 m. long, V/UHF: Diamond D3000N. Both 25 m. up.
- Time zone: GMT +1
- Info page
- Request support
=> READ THIS BEFORE TUNING PLEASE <=
- Welcome on Crema receivers system made by 2 Icom IC-R8500 (https://www.rigpix.com/icom/icr8500.htm). Crema is located 35 Km (20 Miles) South-East from Milano, the most crowded area in Italy.
- This is not a simple online receiver, this is a setup of multi receivers and multi antennas system, check this:
http://www.ik2chz.it/RXonline/Schema_sistema_ricevitori%203.jpg
It costs thousands of € and a LOT of hours for setup and maintenance.
It's one of the very few online receiver with good short wave performance.
All this is for FREE, so use this system properly, do not camp on it and watch the monitor.
- WHO TUNES ASSUMES RESPONSABILITY FOR THE TUNED FREQUENCY.
- Technical tips: set squelch to MINIMUM to eliminate background noise when there are no communications (set it usually around 25%), NO MORE in order not to eliminate weaker signals.
Signal meter: 50% is S9 or 50uV or -73dBm, 100% is S9+70 or 0dBm. It's quite accurate.
- NEVER USE ATT (Attenuator), this decrease receiver sensitivity. Use ATT ONLY for very strong signals in Medium Wave.
- ONLY on MW (Medium Wave 500-1800 KHz) this receiver has an attenuation of about 30 dB vs Crema 1. If you want to receive from 500 to 1800 KHz use Crema 1.
- This system is part of an active Amateur Radio station (See: https://www.qrz.com/db/IK2CHZ) so time to time it can suffer of interferences.
- SysOp Marco IK2CHZ can change frequency without warning.
- More info on: http://ik2chz.it and www.qrz.com/db/ik2chz - For any problem or question contact me on: ik2chz@gmail.com or WA text at +393385030559
==> BY TUNING THIS RECEIVER AUTOMATICALLY YOU ACCEPT THE RULES LISTED ABOVE <==
- Enjoy listening. Marco IK2CHZ - K2CHZ
- Welcome on Crema receivers system made by 2 Icom IC-R8500 (https://www.rigpix.com/icom/icr8500.htm). Crema is located 35 Km (20 Miles) South-East from Milano, the most crowded area in Italy.
- This is not a simple online receiver, this is a setup of multi receivers and multi antennas system, check this:
http://www.ik2chz.it/RXonline/Schema_sistema_ricevitori%203.jpg
It costs thousands of € and a LOT of hours for setup and maintenance.
It's one of the very few online receiver with good short wave performance.
All this is for FREE, so use this system properly, do not camp on it and watch the monitor.
- WHO TUNES ASSUMES RESPONSABILITY FOR THE TUNED FREQUENCY.
- Technical tips: set squelch to MINIMUM to eliminate background noise when there are no communications (set it usually around 25%), NO MORE in order not to eliminate weaker signals.
Signal meter: 50% is S9 or 50uV or -73dBm, 100% is S9+70 or 0dBm. It's quite accurate.
- NEVER USE ATT (Attenuator), this decrease receiver sensitivity. Use ATT ONLY for very strong signals in Medium Wave.
- ONLY on MW (Medium Wave 500-1800 KHz) this receiver has an attenuation of about 30 dB vs Crema 1. If you want to receive from 500 to 1800 KHz use Crema 1.
- This system is part of an active Amateur Radio station (See: https://www.qrz.com/db/IK2CHZ) so time to time it can suffer of interferences.
- SysOp Marco IK2CHZ can change frequency without warning.
- More info on: http://ik2chz.it and www.qrz.com/db/ik2chz - For any problem or question contact me on: ik2chz@gmail.com or WA text at +393385030559
==> BY TUNING THIS RECEIVER AUTOMATICALLY YOU ACCEPT THE RULES LISTED ABOVE <==
- Enjoy listening. Marco IK2CHZ - K2CHZ
© 2007-2018 Ivo Smits, UCIS Internet - About GlobalTuners & Contact - Page generated in 1 ms. 0 SQL queries used.